English
2. Functions and Controls
8
TASCAM CD-X1500 DUAL CD PLAYER
2-3. Remote Controller (Top Panel)
0
OPEN key
Opens and closes the appropriate tray.
…
These keys cannot be used when direct
mode (Preset menu) is off and a disc is
being played back.
q
SEARCH key
Turns on or off the Search function on the Jog
wheel. When this key is lit, the Jog wheel acts as
a search dial. After 5 seconds without search
operation, the unit will exit the search mode
automatically.
w
P.MODE / PGM key
Selects the play mode, either continuous play (all
play), single play (1 track play), or programmed
play.
Continuous play:
No indication in the
LCD
Single play:
SINGLE indicator in the
LCD will light
Programmed play:
PROGRAM indicator in
the LCD will light
Pressing and holding the TIME/ENTER/SHIFT
key while pressing the P.MODE key, enters
program edit mode.
NOTE
e
TIME/ENT / SHIFT key
Selects the time display mode, either elapsed,
remain, or total remain.
ELAPSED: Elapsed time will show in the
numerical portion in display, but no
additional indicator will light.
REMAIN:
REMAIN indicator in the LCD will
light
TOTAL REMAIN: The track number display area
shows the number of tracks of
inserted disc, however, for 5 seconds
in the end of track, the current track
number flashes and for 5 seconds in
the beginning of the track, the
current track number lights.
Another function of this key is the modifier key
(SHIFT function). Holding SHIFT while pressing
another key performs the following functions;
SHIFT + P.MODE:
Program edit
SHIFT + FLASH:
Track memory recall
SHIFT + SET:
Track memory
SHIFT + TEMPO:
Memory bank select
SHIFT + BEND -:
Auto cue on/off
SHIFT + BEND +:
Auto ready on/off
SHIFT + TAP:
Parameter display select
SHIFT + Jog Wheel:
Preset
SHIFT + B:
Loop end point edit
SHIFT + CUE:
Select the CUE key’s
operation
