English
4. More advanced operation
16
TASCAM CD-X1500 DUAL CD PLAYER
4-5. Track Memory / Recall
The CD-X1500 can memorize the various
playback settings of current selected track up to
100 tracks of memory in each 5 banks (A to E).
You could use each bank for a different player or
use the other bank for a different setting for a track,
for example.
Track Memory
1. Select the memory bank (A to E) by pressing and
holding the SHIFT key then pressing the
TEMPO/BANK key.
2. Enter the track memory mode by pressing and
holding the SHIFT key then pressing the
SET/MEMO key.
3. LCD shows the lowest empty memory number.
4. Using the Jog wheel to change the memory
number if necessary.
5. Press the ENT key. At this time, if there is stored
memory in the selected memory number,
indication is displayed in the LCD.
Pressing the ENT key overwrites the data.
Pressing any other key cancels the memory
operation.
Memory data
…
DISC ID
…
CUE point
…
CUE 1-3 points
…
LOOP A/B points
…
LOOP mode
…
Play mode
…
Tempo data
…
Tempo Range
…
Key Original On/Off
…
TAP value
…
Brake On/Off
…
Brake Time
…
Brake Time
…
Time mode
Recall
1. Select the memory bank by pressing and holding
the SHIFT
key then pressing the
TEMPO/BANK key. If there is a track memory
data of selected track in the current selected
memory bank (A to E), the "M" indicator in the
LCD lights.
2. Enter the recall mode by pressing and holding
the SHIFT
key then pressing the
FLASH/RECALL key. If there is a track
memory data for the selected track, its memory
number is shown in the LCD.
3. When track memory number is shown in the
LCD, pressing the ENT key recalls the track
memory data.
The CD-X1500 can recall the track (song) from the
track memory data.
1. Select the memory bank by pressing and holding
the SHIFT
key then pressing the
TEMPO/BANK key.
2. Enter the recall mode by pressing and holding
the SHIFT
key then pressing the
FLASH/RECALL key. Using the Jog wheel to
select the desired track memory number.
