background image

28 

TASCAM  CD-200SB

4 – Playback

NOTE

• 

After pressing the 

DISPLAY [SHIFT]

 button on the main unit 

or the 

DISPLAY

 button on the remote control, the currently 

selected type of information to be shown on the main 

display appears for two seconds as follows.

Track elapsed time:

ELAPSED

Track remaining time:

REMAIN

Total remaining time:

T REMAIN

Album/track title:

TITLE

Album/track artist:

ARTIST

File name:

FILENAME

• 

The text information that can be shown on the display is CD 

text information for audio CDs, ID3 tag information for data 

CDs and ID3, WMA and AAC tag information for SD cards 

and USB flash drives. 

When information is not included for a disc or file, 

NO 

TITLE

 (title information) or 

NO NAME

 (artist information) 

is shown. If the information contains characters that cannot 

be displayed, those characters are replaced by 

_

• 

When an audio CD is in programmed playback mode the 

elapsed time and remaining time of the entire program is 

shown.

• 

The display contents setting is retained even when the 

power is turned off.

• 

The number of songs and track numbers within a folder 

might not match on SD cards and USB flash drives that have 

been written on by a Mac. This is an existing problem with 

Mac system files, but it will not affect playback on this unit.

Pitch control (with CDs only)

Using pitch control playback, CDs can be played back at a
different pitch (sound frequency and playback speed).
Follow the procedures below to use pitch control playback.

1.  Press the REPEAT [PITCH] button while pressing and 

holding the DISPLAY [SHIFT] button on the main unit or 

press the PITCH button on the remote control to turn pitch 

control ON. The current pitch control value is shown at this 

time.

2.  Use the FOLDER 

g

/

t

 [PITCH −/+,  / ] buttons on the 

main unit or the PITCH –/+ button on the remote control to 

set the pitch in 0.5% units in a range of ±14.0%.

o

  To turn pitch control playback OFF:

Press the REPEAT [PITCH] button while pressing and 

holding the DISPLAY [SHIFT] button on the main unit or 

press the PITCH button on the remote control.

NOTE

• 

During playback, turning pitch control playback ON or OFF 

might cause the playback sound to skip momentarily.

• 

Using pitch control playback with a data CD (MP3, WAV) 

sometimes causes the playback sound to skip.

• 

Digital output is possible when the pitch control function is 

ON during playback of MP3 and WAV files on audio CDs, but 

the sampling frequency is changed by an amount propor-

tional to the pitch control value. When pitch control is ON, 

therefore, some equipment might not be able to receive the 

digital output signal from the CD-200SB.

• 

The pitch control function cannot be used with SD cards and 

USB flash drives.

Summary of Contents for CD-200SB

















































Reviews: