Design and specifications subject to change without notice.
© Tascam Division · TEAC Europe GmbH · All rights reserved.
Last update: 27/08/2004
Nominal level
-10 dBV
Nominal impedance
50k ohm
Maximum level
+6dBV
Outputs (analogue, unbalanced)
RCA x 2
Nominal level
-10 dBV
Nominal impedance
1k ohm
Maximum level
+6dBV
Frequency response
50 Hz to 12.5 kHz (High Position)
50 Hz to 10 kHz (Normal)
Signal-to-Noise Ratio
46 dB (Dolby off)
52 dB (with Dolby-B)
Fast Winding Time
120 sec (approx.) with C-60 cassette
CD-R/RW Recorder
Applicable discs
CD, CD-R, CD-RW, CD-R-DA, CD-RW-DA
Quantisation
16
bit
Sampling frequencies
44.1kHz
Inputs (analogue, unbalanced)
RCA x 2
Nominal level
-10dBV
Nominal impedance
50k ohm
Outputs (analogue, unbalanced)
RCA x 2
Nominal level
-10dBV
Nominal impedance
1k ohm
Inputs (digital, coaxial)
RCA, IEC60958 Type II (SPDIF)
Sampling frequencies accepted
32kHz, 44.1kHz, 48kHz
Inputs (digital, optical)
TOS LINK, IEC60958 Type II (SPDIF)
Sampling frequencies accepted
32kHz, 44.1kHz, 48kHz
Outputs (digital, coaxial)
RCA, IEC60958 Type II (SPDIF)
Outputs (digital, optical)
TOS LINK, IEC60958 Type II (SPDIF)
Frequency response
20Hz –20kHz, ±1dB (playback)
20Hz – 20kHz, +1dB, -1.5dB (recording)
Signal-to-noise ratio
92dB (playback), 88dB (recording)
Dynamic range
92dB (playback), 88dB (recording)
Total harmonic distortion
<0.008% (playback)
<0.01% (recording)
Channel separation
>80 dB (1kHz, playback)
>75 dB (1kHz, recording)
General
Headphones output
6.3-mm stereo phone jack
Output power
10mW x 2 (32ohm)
RIAA phono input
RCA x 2
Nominal input voltage
5.6mV, 47k ohm
Signal-to-noise ratio
60dB
Voltage requirements
120 VAC / 230 VAC, 50-60 Hz
Power consumption
28W
Dimensions (W x H x D)
483mm x 138mm x 295mm
Weight
7.4kg
Page 2 of 2
Tascam CC-222MKII
3/18/2005
http://www.tascam.de/en/cc-222mkii.html
