background image

< In the United States >

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This warranty 

is only valid within the country the unit was originally purchased.

WHAT IS COVERED AND WHAT IS NOT COVERED

Except as specified below, this warranty covers all defects in materials and workmanship in this product. The following are 

not covered by the warranty:

1. 

Damage to or deterioration of the external cabinet.

2. 

Damage resulting from accident, misuse, abuse or neglect.

3. 

Damage resulting from failure to perform basic daily maintenance and/or calibration or otherwise resulting 

from failure to follow instructions contained in your owner’s manual.

4. 

Damage occurring during shipment of the product. (Claims must be presented to the carrier)

5. 

Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service 

station.

6. 

Damage resulting from causes other than product defects, including lack of technical skill, competence, or 

experience of the user.

7. 

Damage to any unit which has been altered or on which the serial number has been defaced, modified or is 

missing.

WHO IS COVERED UNDER THE WARRANTY

This warranty may be enforced only by the original purchaser. This warranty is not valid if the product was purchased through 

an unauthorized dealer.

LENGTH OF WARRANTY

All parts except heads and disk drives are warranted for one (1) year from the date of original purchase. Heads and disk 

drives are warranted for ninety (90) days from date of original purchase. Labor is warranted for ninety (90) days from date 

of original purchase.

WHAT WE WILL PAY FOR

We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in 

the next section of this warranty.

HOW YOU CAN GET WARRANTY SERVICE

Your unit must be serviced by an authorized TASCAM service station in the United States. (This warranty is not enforceable 

outside the U.S.) If you are unable to locate an authorized TASCAM service station in your area, please contact us. We either 

will refer you to an authorized service station or instruct you to return the unit to the factory. Whenever warranty service is 

required, you must present a copy of the original dated sales receipt from an Authorized TASCAM Dealer.
You must pay any shipping charges if it is necessary to ship the product to service. However, if the necessary repairs are 

covered by the warranty, we will pay return surface shipping charges to any destination within the United States.

LIMITATION OF IMPLIED WARRANTIES

Any implied warranties, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, are 

limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES

TEAC’s liability for any defective product is limited to repair or replacement of the product, at TEAC’s option. TEAC shall not 

be liable for:

1. 

Damages based upon inconvenience, loss of use of the product, loss of time interrupted operation or 

commercial loss; or

2. 

Any other damages, whether incidental, consequential or otherwise.

Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation 

of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

To locate an Authorized Service Center in Your Area

CALL 1-323-726-0303

< Europe >

This product is subject to the legal warranty regulations of the country of purchase. In case of a defect or a problem, please 

contact the dealer where you bought the product.
Ce produit est sujet aux réglementations concernant la garantie légale dans le pays d’achat. En cas de défaut ou de problème, 

veuillez contacter le revendeur chez qui vous avez acheté le produit.
Dieses Gerät unterliegt den gesetzlichen Gewährleistungsbestimmungen des Landes, in dem es erworben wurde. Bitte 

wenden Sie sich im Gewährleistungsfall an den Händler, bei dem sie das Gerät erworben haben.
Questo apparecchio è conforme alle norme sulla garanzia vigenti nel rispettivo Paese in cui esso è stato acquistato. Si prega 

di rivolgersi al proprio commerciante, presso il quale è stato acquistato l’apparecchio, nel caso in cui si voglia richiedere una 

prestazione in garanzia.
Las condiciones de garantía de este aparato están sujetas a las disposiciones legales sobre garantía del país en el que ha sido 

adquirido. En caso de garantía, debe dirigirse al establecimiento donde adquirió el aparato.

< 日本 >

無料修理規定(持ち込み修理)

1. 

取扱説明書、本体貼付ラベルなどの注意書きにしたがった正常な使用状態で保証

期間内に故障が発生した場合には、ティアック修理センターが無料修理致します。

2. 

本体の保証期間は、お買い上げの日から 1 年です。

3. 

保証期間内に故障して無料修理を受ける場合は、本書をご提示の上、ティアック

修理センターまたはお買い上げの販売店に修理をご依頼ください。商品を送付し

ていただく場合の送付方法については、事前にティアック修理センターにお問い

合わせください。無償修理の対象は、お客様が日本国内において購入された日本

国内向け当社製品に限定されます。

4. 

ご転居、ご贈答品などでお買い上げの販売店に修理をご依頼になれない場合は、

ティアック修理センターにご連絡ください。

5. 

次の場合には、保証期間内でも有料修理となります。
(1) ご使用上の誤りおよび不当な修理や改造による故障および損傷

(2) お買い上げ後の輸送・移動・落下などによる故障および損傷

(3) 火災、地震、水害、落雷、その他の天災地変、公害や異常電圧による故障お

よび損傷

(4) 接続している他の機器に起因する故障および損傷

(5) 業務上の長時間使用など、特に苛酷な条件下において使用された場合の故障

および損傷

(6) メンテナンス

(7) 本書の提示がない場合

(8) 本書にお買い上げ年月日、お客様名、販売店名 ( 印 ) の記入のない場合、あ

るいは字句を書き換えられた場合

6. 

本書(日本語記載部)は日本国内においてのみ有効です。

These warranty provisions in Japanese are valid only in Japan.

7. 

本書は再発行致しませんので、紛失しないよう大切に保管してください。

※  この保証書は、本書に明示した期間・条件のもとにおいて無料修理をお約束する

ものです。この保証書によって保証書を発行しているもの(保証責任者)、およ

びそれ以外の事業者に対するお客様の法律上の権利を制限するものではありませ

ん。保証期間経過後の修理などについてご不明の場合は、ティアック修理センター

にお問い合わせください。

< In other countries/areas >

This warranty gives you specific legal rights, and you may also have other rights that vary by country, state or province.
If you have a warranty claim or request, please contact the dealer where you bought the product.

该保证书赋予了顾客特定的合法权利,并且因国家,州或省等地域的不同,顾客可能拥

有其他权利。如需申请或要求保修,请与购买本产品的销售店进行联系。

If you require repair services for your 

TASCAM

 equipment, please contact the dealer where the product was purchased 

from or the 

TASCAM

 Distributor in your country. A list of 

TASCAM

 Distributors can be found on our website at: 

http://teac-global.com/

WARRANTY

/保証書

Summary of Contents for 8p Dyna Series









































































































Reviews: