How
to
mix down
Connections
Master
level
Monitor source
Routing inputs
Routing tape
signals
Assigning
to
groups
When the 8 tracks are all recorded, the final step is mixing them into a
standard stereo format. This procedure is known as Remixing or
Mixing down. During this procedure the tracks are blended together
and balanced to create the desired sound.
1. Connect the GROUP OUT 1/L jack of the 488 to the left line input
of the mixdown deck, and the GROUP OUT 2/R jack to the right
line input.
2. Raise the 1/L-2/R MASTER fader to the shaded area between 7
and 8.
3. Press the GROUP 1 and GROUP 2 MONITOR selector switches. All
other MONITOR switches must be UP.
4. Set all the INPUT ASSIGN switches on the input channels to the
center OFF position.
5. Turn the TAPE controls of all eight channels fully counterclockwise
to the MIX position.
6. Press all the 1/L-2/R ASSIGN switches.
23
Summary of Contents for 488 PORTASTUDIO
