Tascam 16, Owner'S Manual, Page: 41 / 98

TASCAM Model 16
43
7 - Track editing
Clearing tracks
The selected track will be cleared.
1. Open the
USBDL!DMFBS
Screen when the recorder is
stopped. (See “Menu operation procedures” on page 28)
2. Turn the MULTI JOG dial to select the track to clear, and
press the MULTI JOG dial.
A confirmation message will appear.
NOTE
Press the F2 button to open a message asking to
confirm that you want to clear all tracks.
3. Press the F4 button to clear the track(s).
NOTE
i To cancel clearing tracks, press the F1 button.
i Undoing is possible only for the last cleared track.
4. After clearing tracks completes, the
USBDL!DMFBS
Screen
will reopen.
Importing tracks
You can import audio files that you have to tracks in the current
song.
Files that can be imported to tracks must be WAV (BWF) format
(“
.WAV ” extension).
To import an audio file with a different format (.mp3, etc.) to this
unit, it must be converted to a WAV file that matches the format
of the song it will be imported into beforehand.
1. Connect this unit with a computer. (See “Connecting with a
Computer” on page 49)
2. Use the computer to copy WAV files on it to this unit’s
MUSIC folder.
3. Follow the proper disconnection procedures on the
computer before disconnecting the USB cable. (See
“Disconnecting” on page 49)
4. Open the
USBDL!JNQPSU
Screen when the recorder is
stopped. (See “Menu operation procedures” on page 28)
WAV files in the
MUSIC folder will be shown.
5. Select a WAV file to import.
o
Turn the MULTI JOG dial to select a WAV file.
o
Press the MULTI JOG dial when a folder is selected to
show its contents.
o
Press the F1 button to return to the
NFOV
Screen.
o
Press the F2 button to move up one level.
6. Press the F4 button.
A confirmation message will appear if the bit length of the
WAV file to be imported differs from the current song.
Confirmation message example
o
Press the F1 button to return to the
USBDL!
JNQPSU
screen.
o
Press the F4 button to continue to the
USBDL!
JNQPSU
screen. In this case, the file will be imported
and the bit length will be changed to match the
current song.
NOTE
i If there are no openings for tracks to import, an “
Jnqpsu!
fssps/!Op!usbdl
” pop-up message will appear.
i
To cancel importing a track, press the F1 button.
i
Importing is not possible under the following conditions.
t Not enough open space is available on the SD card
t There are no empty tracks
t
If the sampling frequency of the WAV file you are trying to
import differs from the current song
Example: Trying to import a 48kHz WAV file when the
current song is 44.1kHz
i
If the re is no file that can be imported, a “
Op!Gjmf
” pop-up
message will appear.
7. Select the track to import, and press the F4 button to
import it.
When importing completes, the
USBDL!JNQPSU
Screen
reopens.
NOTE
i Press the F1 button to cancel importing.
i
The part of the track imported before canceling will remain; it
will not be deleted.