22
TASCAM
Model 16
2 - Names and Functions of Parts
Input channel mixing section
q
MODE switches (
1-8
,
9/10
-
11/12
,
13/14
)
Use these to select the input source for each channel. (See
“Setting the MODE switch” on page 36)
w
COMP knobs and indicators (
1-8
)
Use these knobs to adjust the compression thresholds for the
signals input to each channel.
When compression is activated, the
COMP
indicators light.
e
EQ knobs (
1-8
,
9/10
-
11/12
)
i
Use these to boost and attenuate the HIGH, MID and LOW
bands of each channel.
Setting range: ±15 dB
i
The central frequencies of the MID bands can be set for
channels
1-8
.
Setting range: 100 Hz - 8 kHz (default: 600Hz)
i
Channels
9/10
-
11/12
are fixed at 2.5 kHz.
r
MON 1/MON 2 knobs (
1-8
,
9/10
-
11/12
,
13/14
)
Use these to adjust the levels of signals sent to the MONITOR
OUT 1/2 buses.
t
POST switches (1-8, 9/10-11/12, 13/14)
Turn these switches on to send signals to the MONITOR OUT
2 bus after the channel faders.
y
FX knobs (
1-8
,
9/10
-
11/12
)
Use to adjust the levels of the signals sent to the FX bus.
u
PAN knobs (
1-8
,
9/10
-
11/12
,
13/14
)
Use to adjust the stereo positions of the signals input to each
channel.
NOTE
i
When
PAN
knobs are centered (
C
), signals are reduced by 3
dB and sent to both left and right MAIN MIX L/R buses.
i
When a
PAN
knob is turned all the way to the left (
L
), that
channel signal is sent only to the left MAIN MIX L/R bus. It is
not sent to the right bus.
i
When a
PAN
knob is turned all the way to the right (
R
), that
channel signal is sent only to the right MAIN MIX L/R bus. It is
not sent to the left bus.
i
REC buttons and indicators (
1-8
,
9/10
-
11/12
,
13/14
)
Use these to select the channels to record to the SD card.
o
MUTE switches and indicators (
1-8
,
9/10
-
11/12
,
13/14
)
When these switches are on (pushed in,
MUTE
indicator lit),
those channels are muted.
p
Channel faders (
1-8
,
9/10
-
11/12
,
13/14
)
Use these to adjust the send levels of channel signals.
a
MAIN switches (
1-8
,
9/10
-
11/12
,
13/14
)
Turn these switches on (pushed in) to send channel signals to
the MAIN MIX L/R bus.
s
SUB switches (
1-8
,
9/10
-
11/12
,
13/14
)
Turn these switches on (pushed in) to send channel signals to
the SUB L/R bus.
d
PFL switches (
1-8
,
9/10
-
11/12
,
13/14
)
Turn these switches on (pushed in) to send channel signals to
the PFL/AFL L/R bus.
f
ON/MUTE switch
Set this switch to
ON
to input audio from a paired Bluetooth
device.
g
PAIRING button and indicator
Press and hold this button to activate Bluetooth pairing
mode.
Press when pairing to end pairing mode. (See “Connecting
with Bluetooth devices” on page 30)