Model 12 operations
Mixer controls that can be used when in DAW control mode
The following Model 12 controls can be used when in DAW control mode.
o
The blue knobs, switches and faders in the illustration below are enabled.
FX fader
This operates the DAW master fader.
MULTI JOG dial
This can be used for locating.
Function buttons
Their functions depend on what is shown on the DAW CONTROLLER screen.
Press the MENU button to switch function button operations.
DAW CONTROLLER MARKER screen
o
Use the
F2
button to set markers.
o
Use the
F3
and
F4
buttons to move between
markers.
NOTE
The status of the DAW application SOLO switch is shown by
the SOLO item on the DAW CONTROLLER screen.
–
: SOLO switch off
0
: SOLO switch on
DAW CONTROLLER TRACK screen
o
Press the
F2
button to change the DAW repeat
function.
o
Use the
F3
and
F4
buttons to move among
tracks that can be controlled.
ATTENTION
After changing the tracks that can be controlled, the DAW
settings and the state and positions of the Model 12 buttons,
knobs and faders will not match. In this case, adjust the DAW
settings to match the Model 12 settings, or use the Model 12
buttons, knobs and faders to match the DAW settings.
TASCAM Model 12 DAW Controlmode Manual
5