TAS TAS-Link III, Short Instruction

Page: 8 / 44

8
2 Scope of delivery
2.1 TAS-Link III in the housing
As already described in the previous chapter the system of the TD TAS-Link III consists of diverse components
which can be delivered in the widest variety of combinations.
Therefore, the standard configuration is to be described here, namely TLW1+ as well as TEG 1 (e.g. for IP/GPRS)
in the system housing G4+ with 4 LEDs in the housing cover as well as C-Tec NT 560-12/E power supply unit and
7,2Ah battery.
2.2 Accessory
Attention!
Please note that the scope of delivery of the accessory can be different depending on the type of
the TAS-Link! This short instruction only describes the standard scope of delivery.
The following belongs to the standard accessory:

1x TAS-Link III short instruction 99-28-9990100 (you will find the complete handbook on CD)

1x drilling template 08-50-6005015

1x CD (software can be downloaded as well via www.taslink.de )

1x standard accessories kit 00-12-5004006 (see the description of its content below!)

2x patch cable 3m (blue for IP / yellow for ISDN)

1x battery (optional)