background image

6

SAFETY

STORAGE

Following operation, or when unhooking the Manure 
Spreader, stop the atv or utv, set the brakes, shut off the 
engine and remove the ignition keys. 

Simply spray the Manure Spreader clean with a water hose 
before storing to keep hopper and spreading drum from 
clogging.

Store the unit upright to allow any water to drain.

 

Make sure all parked machines are on a hard, level surface 
and engage all safety devices.

EQUIPMENT SAFETY GUIDELINES

Safety of the operator and bystanders is one of the main 
concerns in designing and developing a Manure Spreader. 
However, every year accidents occur which could have 
been avoided by a few seconds of thought and a more 
careful approach to handling equipment. You, the operator, 
can avoid many accidents by observing the following 
precautions and insist those working with you, or for you, 
follow them.

Replace any safety sign that is not readable or missing. 
Location of such safety signs are indicated in this manual. 
Never use alcoholic beverages or drugs that can hinder 
alertness or coordination while operating this equipment. 
Consult your doctor about operating this machine while 
taking prescription medications. 

Under no circumstances should children under the age 
of 18 be allowed to work with this equipment. Do not 
allow persons to operate or assemble this unit until they 
have read this manual and have developed a thorough 
understanding of the safety precautions and how it works. 
Review the safety instructions with all users annually. 
This equipment is dangerous to children and persons 
unfamiliar with its operation. The operator should be 
a responsible, properly trained and physically able 
person familiar with farm machinery and trained in this 
equipment’s operations. If the elderly are assisting with farm 
work, their physical limitations need to be recognized and 
accommodated. 

Never exceed the limits of a piece of machinery. If its ability 
to do a job, or to do so safely, is in question – DON’T TRY IT. 
Do not modify the equipment in any way. Unauthorized 
modification could result in serious injury or death and may 
impair the function and life of the equipment. 

In addition to the design and the confirmation of this 
implement, including safety signs and safety equipment, 
hazard control and accident prevention are dependent upon 
the awareness, concern, prudence, and proper training of 
personnel involved in the operation, transport, maintenance, 
and storage of the machine. Refer also to safety messages 
and operation instruction in each of the appropriate sections 
of the atv/utv and Manure Spreader manuals. Pay close 
attention to the safety signs affixed to the atv/utv and the 
Manure Spreader

Summary of Contents for MS10

















Reviews: