TAROT
@2016 TAROT All Rights Reserved.
6
III. Mounting & Configuration
1. Gimbal Controller Wiring Diagram & Descriptions
Wiring Diagram
说明：
Battery
Power Supply:3S-6S Li (11V-26V)
* If you choose a battery to power up the gimbal and multi-rotor, please make sure this battery
meets requirements of both components.
Receiver
1
、
Common Receiver
: connect it to the CH1/SBUS and CH2 Channel in the gimbal main
controller. Also, set Receiver Type and corresponding channel in the assistant software.
2
、
FUTABA SUBS or SBUS-2
: connect it to CH1/SBUS channel in the gimbal main
controller.
MAKE SURE CH2 IS UNCONNECTED
. Also, set Receiver Type and
corresponding channel in the assistant software.
3
、
If you have 5V power supply to the receiver, please disconnect the 5V power of
CH1/SBUS channel.
Video
Connect the video wireless transmission module to AV out port.
DO NOT
misconnect signal
and video cable.
Flight Controller
Gimbal can work independently without Tarot ZYX-M Flight Control Module, but its
