20
TECHNICAL DATA
Power
required
55-85
hp
Working
width
1,8
m
Roller
diameter
160
mm
Length from the tractor center line
240 cm
Hitch
3-point
CAT2
Swivel
head
down
60
˚
, up 90
˚
Knife
size
40x140x16,5
mm
Number
of
knives
16
pc
Gearbox lubrication
SAE90W, volume approx. 1,2 litres
Weight
658
kg
This product fulfils the requirements of quality class HA ISO 2807.
PRODUCT DESCRIPTION
This flail mower is ideal for ripping, leveling, finish grading, and backfilling applications at
feedlots, outdoor arenas, building sites, and maintenance operations on farm and ranch
lanes or roadways. This mower is designed with a 3-point hitch. Any use other than its in-
tended purpose is deemed to be improper. The manufacturer is not liable for any damages
caused by improper use.
PRIOR TO USE
Tractor hook-up
1.
Move draw bar ahead or remove if required.
2.
Align lower link arms of tractor to hitch clevises on mower. Turn the lifting device ad-
justment on.
3.
Attach tractor top link to upper floating hitch on mower. Secure with a lock pin.
4.
Adjust tractor top link in or out to place upper hitch pin vertically above or slightly be-
hind lower hitch pins to allow mower flotation. The mower should be run with the back
15 degrees lower than the front.
Driveline shortening
1.
Hold the half-shafts next to each other in the shortest working position and mark them.
2.
The overlap is proper if the shaft could be 5 cm in the shortest position. Shorten inner
and outer guard tubes equally.
3.
Round off all sharp edges and remove burrs. Grease sliding profiles.
Engaging PTO
1.
Slide driveline end with extended safety cone over splined shaft of gearbox and secure
with attaching device.
2.
Slide driveline over tractor’s splined PTO shaft and secure with locking device of
driveline.
3.
Driveline should now be moved back and forth to insure that it is secure on the PTO
shaft of the tractor and mower gearbox.
4.
Attach chain from the driveline shield to one of the upper hitch braces to ensure that the
shield does not rotate.
5.
Prevent the lifting device from moving from side to side by locking the stabilisers.
