Picture 6
Picture 8
Picture 7
The MT-1 antenna bracket is designed to make your antenna
mounting convenient and incredibly strong. Made to clamp to
standard 1" pipe (1.312 OD) or bolted to a flat surface. (Picture 6)
There are a few steps to make
sure you install the MT-1
antenna bracket the way it
was intended. First you need
to install the upper half of the quick disconnect
in the bottom of the antenna tight (Picture 7). Be
sure to use the lockwasher
The MT-1_ antenna bracket has 6 cutouts for the anti-
rotation rib that's on the antenna. Be sure the rib
goes into one of these cutouts, there is no need
to cut the insulator, it will compress enough to
tighten the antenna down. (Picture 8)
Don't forget to tighten
down the top half
plate and the quick
disconnect.
(Pictures 9 & 10)
Picture 9
Picture 10