4
Connection with Windows 2000/XP
1.
Plug the USB receiver connector to your PC.
2.
The Found New Hardware Wizard appears and the OS will
install the driver automatically. No other steps are necessary.
You are now ready to begin using your wireless keypad
Connection with MAC OS
Plug the USB receiver connector to MAC then you can start to use
your wireless keypad.
ID setting
There are two methods for receiver to enter “Setup phase”.
1.
Power ID search:
When plug in USB host or PC power on keypad will enter
“Setup phase” until receive first valid packet. The LED
indicator will flash 1 minute to indicate ID search mode
2.
Button ID search:
Plug the receiver into your notebook’s USB port, then
pressing the ID button on the back of the keypad.
