4
Features
PAUH200
• Has two type B USB ports that allow a user to connect and
simultaneously use the hub with a second computer
• Supports hot swapping and Plug and Play operation
PAUH210
• Supplied “Y” power cable uses two type A USB connectors,
one for power and data flow (black) and the other for power
only (red), eliminating the need for an AC power adapter
System Requirements
To use the hub, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
NOTES: The USB 2.0 High Speed 4-Port Hub is backward
compatible, so you can connect it to a computer with either a
USB 1.1 or 2.0 interface.
When using the hub with a computer that has a version 1.1
USB interface, all of the devices attached to the hub will run at
USB 1.1 speed (up to 12Mbps).
Hardware
Operating System
• PC with an Intel
®
Pentium
®
processor or equivalent and a hard
disk drive
• 64 MB RAM or higher, depending
on the operating system
• USB interface
• Windows
®
98SE
• Windows
®
Millennium
Edition
• Windows
®
2000
• Windows
®
XP
• Mac OS X
Summary of Contents for PAUH200
Page 2: ......
