Targus Find My Location Module
4
Replace the battery with a new CR2032 coin cell
battery and attach the battery cover by reversing the
removal instructions above (as shown in figure 4).
figure 4
Removing the Location Module
If the location module needs service or warranty
replacement, it will need to be removed from the
backpack.
To remove the location module, use the removal
tool that came with the backpack. As an
alternative, a small paper clip can be used.
From Inside of Backpack
Open the zippered location module compartment
inside of the backpack. Locate the pin hole on the
side of location module (figure 5).
figure 5
Insert the removal tool or paper clip and press to
release the module from the outer mounting frame
(figure 6).
figure 6
From Outside of the Backpack
Push down on the right side of the module, as
you insert and press the removal tool so that it
detaches from the outer mounting frame. (figure 7)
figure 7
Use the plastic filler cap (inluded with your
backpack) to fill the hole while the module is
out for repair or replacement. To install the filler
cap, revserse the removal instructions, above, by
depressing the pin hole while pressing the filler
cap into place (figure 8).
figure 8
1
2
