Targus Control Max
Targus Control Max
2
3
EN - Introduction
Thank you for your purchase of the Targus Control Max Presenter Remote. It offers true plug-and-
play capability with no need for software drivers and the 2.4 GHz technology allows for effective
presentations at up to 66’/20m.
Contents
• Control Max Presenter Remote
• USB-A Stowable Dongle
• 2 x AAA battery
• User Guide
System Requirements
Hardware
• USB-A interface
Operating System
• Windows® 10
• macOS®
• Chrome OS™ (Chrome Slider only)
“App/Programme functionality may vary, please check with your software provider”
Installing the Battery
1. Open the battery cover at the bottom of the presenter.
2. Insert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match
the polarity indicators inside the battery compartment.
3. The White LED will light for 3 seconds vibrate twice after correct battery installation.
4. The Red LED will flash until power off when the battery is low. Please replace battery.
CAUTION : risk of explosion if the battery is replaced by an incorrect type.
Establishing connection by 2.4G mode
1. Plug the USB-A receiver into any USB-A port on your laptop.
2. The presenter will connect laptop automatically, you can see the logo at LCD screen
bottom once 2.4G connection successfully. Please follow step 3 if 2.4G mode is not working.
3. Depress “Laser Play PTT Button” for 3 seconds. The White LED will flash during
pairing.
Establishing connection by Bluetooth
1. Enable the Bluetooth setting on your laptop/computer device.
2. Depress “Laser Back Screen Button” for 3 seconds. The White LED will flash for 3 mins
during pairing.
3. While the White LED is flashing, go to your laptop/computer Bluetooth setting and select “Targus
P068” Bluetooth device name.
4. The Bluetooth presenter is now connected to your laptop/computer and the White LED turns
off, you can see the logo at LCD screen bottom once Bluetooth connection successfully.
5. If the pairing process takes longer than 3 minutes and the White LED turns off, reinstall battery
and follow step 2.
Establishing Vibration Timer
1. Click Vibration Timer Button once, the Hour Zone number 0 will flash to wait for setting, click
Forward or Backward Button to increase or decrease your target number from minimum 0 to
maximum 9 hours.
2. Click Vibration Timer Button twice, the Minute Zone number 00 will flash to wait for setting, click
Forward or Backward Button to increase or decrease your target number from minimum 00 to
maximum 59 minutes.
3. Click Vibration Timer Button thrice, quit Vibration Timer Setting Mode. It will go to step 1 once
you click the button.
4. Hold pressing Vibration Timer Button 3 second, timer will be clear.
5. Click Vibration Timer Start / Pause Button once, start timer when timer setting available and you
can see play logo at LCD screen top.
6. Click Vibration Timer Start / Pause Button twice, pause timer when timer setting available and
you can see pause logo at LCD screen top.
7. Presenter will vibrate once when timer balance at 5 minutes and 3 minutes, presenter will vibrate
twice when timer balance 0 minute.
Power Saving Mode
In order to conserve power and increase battery life time, the presenter will enter power saving
mode automatically after 5 minutes while presenter is motionless. Click on any button to resume to
normal operation, the presenter may take a few seconds to reconnect with your laptop/computer.
Reconnecting the laptop/computer device
The presenter will automatically attempt to reconnect to the most recent device whenever 2.4G
mode or Bluetooth mode when power on or awaken.
Troubleshooting (Bluetooth connection)
• Make sure your presenter power is on.
• Make sure your laptop/computer device Bluetooth is working properly.
• Power indicator light flashing red indicates low battery.
• If your laptop/computer is connected to other Bluetooth devices, you may need to disconnect
some devices before you can connect the presenter.
• If the presenter is still not connecting to your laptop/computer device and you see several “Targus
P068” on Bluetooth device list, you may need to remove all “Targus P068”, then hold the combo button
“Laser Black Screen Button” for 3 seconds to make a new device Bluetooth pairing connection.
• If the presenter is still not recognized, make sure the correct version of software is installed. Verify
the Windows and Mac OS version for compatibility.
Vibration
Timer Button
Vibration
Timer Start /
Pause Button
Hour Zone
Minute Zone
