Targus AMW584 Bluetrace Wireless Mouse
Targus AMW584 Bluetrace Wireless Mouse
3
4
folding line
2 staples here (saddle stitching)
O
pen size: 9”
W x 4.5”
H F
olde
d S
ize: 4.5”
W x 4.5”
H M
ater
ial: 80gsm w
oo
df
re
e p
ap
er C
olo
r: G
ra
ys
ca
le
Die
cu
t
(UG) AMW584GL-50_410-4169-001A
Installing the batteries
Setup the Connection between the Receiver and the Mouse
Step 1: Take the battery cover off.
Step 2: Insert the batteries as shown inside the battery compartment.
1. Insert the batteries into the mouse, then follow the steps below.
2. In the meantime, to open the mouse under the cover, take the
nano receiver out.
Step 3: Replace the cover.
Step 4: Turn on power switch.
Step 5: If you need to travel with your wireless mouse, made sure you turn off the POWER
SWITCH.
3. Plug the Nano receiver into the USB A port on your computer.
4. If the mouse does not work, please put it into pairing mode.
5. Pairing: Re-plug the receiver into the USB port on your computer, then press the connect button
on the mouse. If the mouse does not work after 10 seconds, pair them again. (The receiver has
auto pairing function).
6. The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking when
it is successfully paired with the receiver.
7. When low battery, the battery indicator on the mouse will start to blink.
AA Battery X 2
Warning:
Please insert the battery with the correct
position according to the instruction labeled
on the mouse.
