background image

Targetmax® V.2.0 Attendance System Hardware Suite Guide 

 

21 

1.10.3  Phonic Notice 

To remind the user whether the operation is correct or not by LCD display or 
voice notice 
 
Selected voice on – under correct operation, the machine will give a voice 
notice “Thank You” and while under incorrect operation, the machine will give a 
voice notice “Press Again” 
 
Selected voice off – under correct operation, a short “Bi, bi, bi…” sound can be 
heard and while under incorrect operation, the machine will give a long “Bi---”t 
sound. 
 
The machine will resume work after 2 seconds or user can press either key to 
resume normal operation. 

 

Chapter Two - General Operation 

(Please read this chapter very carefully) 

2.1 Start the Operation 

Turn on the machine and the screen will show: 

 

 

 

 

2.1.1 Press “Menu” to the Managing Status   

The machine does not need any verify of the manager at the beginning of 
operating because there is no manager registered data existed. If the machine 
needs you to verify the manager, please contact your dealer to delete it via the 

Welcome! Please press finger… 

08

00 Saturday 

2006–07–30   

Targetmax® V.2.0 Attendance System Hardware Suite Guide 

 

22

software of attendance system, if so, please refer to the “Software Suite Guide” 
for details. 

  Setting Date and Time. 

   

   Functional Setting -   

       

  Initialization of Management and Attendance records (this can be ignored 

since there is no data inside the machine when first use) 

         

  Register manager. 

 

2.1.2 Press “ESC” back to Normal Attending Status   

 

  Press “Menu” enter the managing state 

       The machine needs to verify the manager identification because the 
 

Manager’s data  has been registered. 

 Register User 

Refer to the item   

  Press “ESC” back to normal attending status 

 

2.2

 

Usage under the Normal Attending Status

 

There are 3 ways in the state of normal attending, fingerprint, password and ID 
card attendance. 

2.2.1 Fingerprint Attendance   

Normal attending status show: 
 
 
 

 

For those Users already registered their fingerprint, please put the finger on the 

Welcome! Please Press Finger…

08

00 Saturday 

2006–07–30   

Summary of Contents for TA920






























Reviews: