3
HOW IT WORKS
The Probe Sensor is designed to detect anything
metallic, so it will not be triggered by people, animals or
by moving trees or shrubs.
The Directional Probes can differentiate between vehicles
entering or leaving and can sound different tones on the
Receiver to alert you to either a vehicle coming or going.
The Directional Probe Sensors are set up on a driveway
or access way you want to monitor. The Probe Sensors
have a detection range of 3m either side of them.
The Probe Sensors are normally buried under the
driveway (approx. 100 mm deep) and have a 15m cable
connected to the Transmitter box which is mounted on a
post or tree.
When the Probe Sensors are activated a signal is sent
to the Receiver, which plays a tone to alert you – so is
usually set up in your house, shed, office etc.
The kit has a range of up to 1.6 km from the Probe
Sensors to the Receiver.
ABOUT
.
HAVING TROUBLE?
If you’re having trouble with the installation of your kit, or
have questions on how best to configure your kit, check
out the Frequently Asked Questions on our website.
www.bealert.co.nz/FAQ
HELP
.
