background image

ENGLISH

14

Other Information

Specifications

LCD

Type

Color filter
Glass surface

19” (full 19” viewable diagonal area)
TFT (Thin Film Transistor), Active Matrix SXGA LCD, 0.294 x 0.294
mm pixel pitch.
RGB vertical stripe.
Anti-Glare, Hard-coating 3H

Input Signal

Video Sync

RGB Analog (0.7 V

P-P

, 75Ohms)

Composite Sync, Separate Sync, Sync On Green.
TMDS (Digital)
f

h

: 30 ~ 80KHz, f

v

 : 50 ~ 75 Hz.

Compatibility

PC
Macintosh

Up to 1280X1024 Non-interlaced.
Power Macintosh up to 1280X1024.

Resolution

Recommended
And supported

1280 x 1024@ 60,70,Hz
1024 x 768 @ 60,70Hz
800 x 600 @ 56,60,72Hz
640 x 480 @ 60,75Hz
720 x 400 @ 70Hz

Power

Voltage

90 ~ 264 VAC, 50 / 60 Hz (auto switch)

Display Area

Full Scan

376.32 mm (H) X 301.056 mm (V)

Operating
Conditions

Temperature
Humidity

0ºC to +40ºC (32ºF to +104ºF)
10% to 90% (no condensation)

Storage
Conditions

Temperature
Humidity

-20ºC to +60ºC ( -4ºF to +140ºF)
10% to 90% (no condensation)

Dimension

Physical
Display only

436mm (W) x433mm (H) x 182 mm (D)

Weight

Net

5.57kg LCD display only.

Regulations

cULus, TUV/GS, CE, FCC-B, VCCI-B, TCO99, Energy Star.

Power saving
mode

On
Active off

Normal (green LED)
< 2 W (orange LED)

Preset timing mode (Pre-adjusted to VESA 1280x1024@60Hz).

WARNING:

Do not set the graphics card in your computer to exceed the
maximum refresh rate of 85Hz / 1280 x 1024 @ 75Hz. Doing so
may result in permanent damage to your LCD display.

Summary of Contents for VISIONARY LCD 19-1






















Reviews: