Targa TN700, User Manual, Page: 125 / 154

1
2
3
4
5
6
A
B
B – 13
message: Incorrect Drive A: type - run Setup
description: The FDD is incorrectly dentified in Setup .
solution: Run Setup and check the settings for the FDD, usually 1.44MB/
3
1
/
2
”, (refer to Chapter 4: Firmware ).
message: Keyboard controller error
description: The keyboard controller failed the POST.
solution: 1. Try restarting the system.
2. If you are using an external keyboard, remove it and make
sure the onboard keyboard works correctly. If it does, you may
have to replace the external keyboard.
3. If you changed the video output, make sure you didn’t
dislodge the keyboard ribbon connectors (refer to Chapter 2:
System).
4. If the problem persists, contact your service center.
message: Keyboard error
description: The POST doesn’t see the keyboard.
solution: 1. Try restarting the system.
2. If you are using an external keyboard, remove it and make
sure the onboard keyboard works correctly. If it does, you may
have to replace the external keyboard.
3. If you changed the video output, make sure you didn’t
dislodge the keyboard ribbon connectors (refer to Chapter 2:
System).
4. If the problem persists, contact your service center.
POST errors