TARGA Karaoke Kit TM200
English - 8
Option Two (Connecting a TV Set for Video and Hifi
Equipment for Audio)
Carefully separate the yellow wire of the audio/video cable so
you can plug it to the TV set only later on. If your TV Set has a
Cinch receptacle for video input you can connect the yellow
Cinch connector to it. Otherwise proceed as for Option One
and use the SCART adapter (In). In this case, the red and
white receptacles for audio input will not be used on the TV
set. Instead of connecting them to the adapter, connect them
to your Hifi equipment. Connect the cable to a suitable input
(other than Phono).
Connecting a DVD player
Connect one of the supplied audio/video cables to the group of
three Cinch receptacles (Input). For easier connection, the
different cables and receptacles are coloured. If the DVD
player also features a corresponding group of three
receptacles for audio and video signals, you may connect the
cable to it. If your DVD player only features a SCART (Euro
AV) connector, you must use the supplied SCART adapter
(Out). The adapter also features the mentioned colour code.
Connecting the Microphones
Next you can connect one or both microphones. Plug the XLR
connector of the microphone cable into the microphone. The
correct end of the cable can be easily identified by the shape
that matches that of the microphone. The other end has a
phone jack connector that plugs into the microphone
receptacles of your TARGA TM200. You may use any of the
two microphone input jacks. You only have to remember that
each input receptacle is assigned to a microphone gain
control.
Connecting the Power Supply
Plug the power adapter to your TARGA TM200 and then to a
wall outlet. The device is now ready.
