TARGA SYSTEMS
S3 SATA Installation Guide
32003375 Rev 2
6
3.2
PC Card Handling
Targa's SATA Holder does not provide any locking mechanism to prevent card removal
during operation. Targa's SATA Holder is equipped with a door sensor to perform a card
shutdown and SATA link OOB signalling to support “Hot Swap” operations .
To install the card, slide the card into the slot until it is fully engaged in the socket and the
eject button "pops" out. To remove the card, gently push the eject button to release the
card from the socket.
- CAUTION -
Any resistance to card insertion is an indication it has been inserted upside down.
Excessive insertion force may result in the PC Card key tab being damaged and the card
may become trapped in the unit. Should this occur do not apply excessive force to the card
ejector or damage will occur to the card ejector.
