6
ENGLISH
99.973%
82%
80%
HEPA Cartridge Filter
Vacuum Filter
Clean Air Filter Bag
Filtration Systems
Filter Configurations and Maintenance Tips
Configuration
Installation
Applications
Tips
“Clean Air “ Filtration
(Grey Targa Filter)
1. Remove vacuum head from tank.
2. Place Targa filter in tank.
3. Replace vacuum head on tank with the airflow
indicator light centered over tank inlet. Align
clamps on the side of tank with tabs on head
and lock clamps.
General dry vacuuming.
(i.e. schools, hotels, offices, etc.)
• To maximize filter life, maintain air quality
and performance, clean filter with soft brush,
shake, or wash in lukewarm water.
•
Inspect filter for signs of wear and replace if
necessary.
•
For best performance, use with a paper dust
bag installed.
Superior “Clean Air” Filtration
(Grey Targa Paper Dust
Bag)
1. Remove vacuum head from tank.
2. Unfold dust bag, gently seperate walls of bag,
insert into tank (before placing Targa filter in
place).
3. Slide rubberized bag collar over inlet nozzle.
Ensure collar face is against tank wall.
General dry vacuuming with the convenience
of a bag. (i.e. schools, hotels, offices, etc.)
Excellent for fine dust applications where
blinding of filter is a problem.
(i.e. chalk dust, dry wall dust, lampback, silica
dust, etc.)
• Ensure collar is on inlet as far as possible (if
not, bag may come off).
•
Sides of bag should be seperated after
installed in tank to maximize entire bag
volume.
•
Grey Targa filter must be in place before
operation.
Optimum “Clean Air” Filtration
(Targa Paper Dust Bag +
HEPA filter)
1. Remove vacuum head from tank, setting the
head on the side.
2. Place clamp on outer ring of HEPA (do not
tighten until filter is on black float cage).
Ultra high filtration vacuuming where air
quality is crucial.
(i.e. hospitals, computer areas, areas where
asthmatics and allergy sufferers live and work.)
•
To maximize filter life, maintain air quality
and peak performance, the HEPA filter
should only be cleaned with a soft brush or
blown clean with compressed air.
•
Never wash or expose HEPA filter to water as
this will damage filter material.
•
Inspect filter for signs of wear and replace if
necessary.
•
Always use with paper dust bag and Targa
filter.
Wet Filtration
(Targa 990 and Targa XL)
WARNING! REMOVE ALL OTHER
FILTERS BEFORE INSTALLING
WET FILTER
1. Remove vacuum head from tank.
2. Remove any other filters.
3. Empty out contents in vacuum tank (rinse out
with water if possible).
4. Place wet filter in tank ensuring black gasket is
free of dirt and sitting flat on tank rim.
5. Replace head and lock clamps.
For removal of liquids from carpets and hard
floors. Ideal when picking up liquids after
stripping and rinsing floors and for removal of
slush from entrance walk-off mats in winter.
•
After vacuuming liquids, clean by vacuuming
a small amount of clean water. Allow to dry in
a ventilated area.
•
To minimize foam build-up, use Dustbane’s
De-Foam in tank.
•
For ease of emptying, fill tank to no more
than 3/4 full.
•
Do not use for dry application as this will
result in damage to the motor.
