09
Important recommendations
Presentation
2- Install the power supply in a firm and ventilated place. Never install it on the sides of speakers boxes, due
to vibration.
5- Do not install the power supply in a place with direct exposure to sunlight.
1- The PRO CHARGER 90A has an “automatic bivolt” system - it automatically recognizes the voltage of the
AC mains and adjusts itself to it. For the power supply to have the expected performance, voltage must be
above 90V (127VAC ) or above 190V (220VAC ).
3- The power supply has no user-serviceable internal parts. Do not open it, risk of electric shock.
4- If the power supply is not going to be used for a long period, we recommend disconnect it from the AC
mains.
6- The installation location and type of use may influence the product’s performance. Closed places, with
low air circulation and/or places with incidence of other heat sources, may interfere with the product's
efficiency. However, the product has intelligent sensors that manage temperature and cooling conditions
and change its power to ensure robust operation, preserving the durability of internal components. If the
installation is in environments with such characteristics, it is recommended to use the product with a power
gap of at least 30%, and, if necessary, increase the quantity.
Introdution
Congratulations on your purchase of a Taramps product. Designed in a modern laboratory, with the highest
technology and highly qualified professionals.This manual explains all features, operations, and guidelines
to answer questions that may arise during your installation. Please take the time to read it carefully to
ensure proper installation and use of all the benefits this product can offer.If there is any question after
reading this manual, contact our technical support at the phone 55(18)-3266-4050 or through
our website www.taramps.com.br.
www.taramps.com.br
.
Taramps reserves the right to change the content of this manual without prior notice or obligation to apply the
modi cations to previously produced units.
Safety warnings
As you read this manual, pay attention to the safety warning symbols.
The
"Caution"
symbol is intended to alert the user to important instructions.
Failure to follow instructions could result in risk to the user or damage to the
product.
CAUTION
- Output short circuit protection.
WARNING: NEVER REVERSE POLARITY.
- During battery recharge, if the audio system is turned on, the power supply automatically identifies and
adjusts its output to 14.4V. If no more output variations are identified, the source returns to the smart
charging system or float.
The PRO CHARGER 90A power supply / charger features high technology and smart and efficient features
for RECHARGING batteries and/or POWERING a car sound system. Highlighting:
- When used only as a power supply (without batteries) the power supply output can by set as 12.6V, 13.8V
or 14.4V.
- Automatic detection of the load characteristics connected to its output. In case it has batteries, the device
analyzes their characteristics and conditions and recharges them seeking the best performance. If the
battery charge level is critical, the power supply automatically adjusts the output current, smartly charging
the batteries.
- When charging the batteries, the power supply periodically oscillates between voltages 14.4V / 13.8V /
12.6V; doing the battery float and equalize cycles. This process decreases the internal heat of the batteries,
improving charge retention efficiency.
