Use of parallel power supply
Battery charger & amplifier power
The maximum output current will be the sum of each power supply/battery charger. Example: 2 power
suppliers/battery chargers PRO CHARGER 40A will supply 80A of total current.
Many power supply/battery charger can be used on parallel mode. The output voltage of all power
supply/battery charger must be at the same output voltage of the PRO CHARGER 40A. First adjust the
voltage of all power suppliers/battery chargers and then do the connections.
(**) Use individual AC Power Input as recomendated for each power supply/battery charger on page 09.
(*) Use circuit breaker like indicated for each power supply/battery charger.
In this case, beside charging the batteries, the PRO CHARGER 40A will assist the batteries in the power
supply of the amplifier.
(**) See recommended circuit breaker by amplifier manual.
The battery charger system don´t damage the bateries,
seeing that when the battery reaches the voltage set, they
will go into floating voltage.
(*) See recommended circuit breaker for your power
suplly/battery charger on page 09.
11
Circuit breaker
Circuit breaker
+
Illustrative Images
Circuit breaker
+
AMPLIFIER
Circuit breaker
Circuit breaker
+
AMPLIFIER
Illustrative Images
