Technical features
Internal protection fuse:____________________
FM frequencies:__________________________
Nominal RMS Power of each channel:__________
Frequency response (equalizers at 0dB):_______
TARAMPS THS 1800:_______________________
Each channel nominal Impedance___________
Number of Channels:______________________
Low (bass):_______________________________
Power Supply:____________________________
Total Harmonic Dist Noise (THD + N) at
the nominal power of each channel (60W)______
AUX Input impedance:_____________________
Consumption in Stand by:__________________
RMS Power:______________________________
High:___________________________________
AUX input Sensitivity:______________________
Typical 3-way equalizer performance:
:
Mid (mid bass):___________________________
Maximum consumption:___________________
Protection System:________________________
Ratio signal/noise:_________________________
Dimensions:_____________________________
Weight:_________________________________
For more information or questions visit our website or contact TARAMPS support.
* Nominal power with 1KHz sinusoidal signal and 4 ohms resistive load. (Measured according to ABNT NBR IEC 60268-3
sound equipment, Part 3: Amplifiers).
The values mentioned are typical and may change due to the tolerance of components or the manufacturing process.
Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the
modifications to units previously produced.
10
Receiver Multi Channel Class AB
80
4x20
W (
W)*
8.95 Vrms
04
≤4%
4 Ohms
200 mV
2.2K Ohm
20Hz ~ 20KHz (-3dB)
±12dB - 80Hz
±12dB - 2KHz
±12dB - 10KHz
1.4W
115W
3A
Output protection against short and
overheating
90 ~ 240V AC (automatic) -50/60Hz
>70dB
87.5 MHz ~ 108MHz
1.18Kg (2.60lb)
269 x 59 x 142mm (10.59" x 2.32" x 5.59")
