20
21
Owner Card
The Owner Card has two main functions:
› Registration and Deregistration of the Tapkey Smart
Lock
NFC Transponder (NFC Tag, NFC Card, NFC Sticker)
› Locking and opening
Status messages
Programming with the Owner Card is performed on
each reading knob. All events which take place during
programming are stored at the respective reading
knob.
Opening and locking
To open or lock the door, you must only hold an
authorised smartphone or NFC Transponder a short
distance in front of the relevant knob.
The Tapkey Smart Lock is engaged and the green LED
flashes during the set engagement time.
Once the clutching time has expired, the red LEDs flash
once.
Unauthorised smartphone or transponder:
The Tapkey Smart Lock is not engaged. The red LEDs
flash four times.
MAINTENANCE
The Tapkey Smart Lock is maintenance-free. The energy
supply of the Tapkey Smart Lock is provided by a bat-
tery consisting of 2 lithium batteries (3 V). A low battery
warning indicates that the battery must be changed.
The Tapkey Smart Lock is equipped with a three- stage
warning system.
Please note: Up to 500 unlock operations
are still possible in warning stages 1 and 2.
A battery warning is also shown in the Tapkey
App during the unlock process.
First warning stage:
Before indicating an unauthorised or authorised trans-
ponder and if applicable before engagement, the red
and green LEDs flash alternately. Finally, the blue LEDs
flash once.
Engagement then occurs.
Second warning stage:
The authorised transponder must be presented twice.
The low battery warning appears (first) each time the
transponder is presented. The blue LEDs flash twice.
Engagement then occurs.
