FAST-18T Radar Speed Display Trailer user Manual
20
The data is saved in an ASCII text format and can be viewed using the
Data Viewing Software
provided by Adaptive Micro Systems, or you can create your own reports and graphs with the raw data
and your own programs like Microsoft Excel®.
A 128MG SD card can save over 6,000,000 vehicle entries. Note the more vehicles on your card, the
longer the reports will take to generate.
2.
IN-DEPTH SETUP GUIDE AND SETTING COMMANDS - DATA RECORDING UNIT
Use the + and - buttons to navigate through the Settings Menu. To select the displayed options, press the
Enter button.
The Settings Menu allows you to:
1.
Set Distance
- Set the distance at which the radar is picking up vehicles. The distance units automatically
align with the speed units being used by the radar (e.g. miles if MPH and kilometers is KPH).
2.
Your File Name
- This is helpful if you decide to move the trailer to a
different location on the same day. Each file can list, for example, the
street name so when you are ready to run the reports, you can easily
identify each location. If you have multiple trailers/signs, each unit can
have a unique name or number.
a.
Make Your File Name
- The file name is (8) characters long and can
be any combination of letters, numbers, and spaces. The default file
name is in “MMDDYY.RU2” format. If the first file is not deleted and
the card is used again
on the same date
, the next file will read “MMDDYY-1.RU2”. It will automatically
rename the files up to “MMDDYY-9.RU2”. When 10 such automatically renamed files are already
present, you will get an error message.
To input a new file name, press the “Enter” key at the
Your File Name
screen. Use the + and – keys to
select the characters and press “Enter”. The cursor will move to the next space. Once all (8) characters
are entered, the screen will read “Custom File Name Successfully Set”, then the screen goes back to the
Return to Main Menu - + Enter
screen. Press “Enter” to return to the main screen.
b.
Format SD Card
- Erasing data on the SD card can be done while the data recorder is mounted inside
the trailer enclosure. This feature is used to delete any existing files on the SD card. Press the Enter
button to use this feature. The display will read “Insert card (– to cancel)”. To erase the card, insert the
card into the memory slot located on the right side of the data recorder. When it’s finished, the display
will read “Format Done, Remove Card”. The SD card must now be removed to return to the menu
features.
c. The
Radar Type
and
Radar Speed should only be changed if directed by an authorized
technician.
Figure 5
- Settings Menu
