Tapco Adaptive FAST-18, User Manual, Page: 12 / 15

FAST-18 Pole-Mount Radar Speed Display Sign user Manual
12
SETTING THE EVENT TIMER
Note:
If you become lost while setting any of the numbers, the settings operate the same as the display set.
In other words, if any numbers are missed the first time around, they will repeat again by holding in the
pushbutton. Also, the power key can be cycled on and off to start over from the beginning or the key
chain remote option allows you to advance or reverse all numbers using both of its buttons.
As an example, let’s set the sign to operate only during normal to high traffic hours (for conserving the battery)
to run daily from 5:30 AM to 11:45 PM. The current time is 8:17 AM. These would be the programming steps:
ƒ
Turn power on. After the brightness number changes, push the button and stop on “ST”, the“Set Time”
mode. Push the button until the display shows “EN” (Enable):
1. Wait five seconds for “OH” (“ON” Hour) to display.
ƒ
“OH” displays. Push the button to see 05 (hours) on the display
2. Wait five seconds for “OM” (“ON” Minute) to display.
ƒ
“OM” is displayed. Push the button to see 30 (minutes)
3. Wait five seconds for “FH” (“OFF” Hour) to display.
ƒ
“FH” is displayed. Push the button to see “23” (11PM)
4. Wait five seconds for “FM” (“OFF” Minute) to display.
ƒ
“FM” is displayed. Push the button to see “45” desired time
5. Wait five seconds for “HR” (Current Hour) to display
ƒ “HR” is displayed. Push the button to set “08”
6. Wait five seconds for “MN” (Current Minute) to display
ƒ “MN” is displayed. Push the button to set “17”
SECTION C - TECHNICAL INFORMATION
1. SPECIFICATIONS
a.
Overall:
ƒ
Dimensions: 40” W x 34.5” H x 4” D
ƒ
Shipping Weight:
50 lbs
ƒ
Operational Temperature Range: -22°F to +158°F
ƒ
Speed Detection Range:
5-99 mph
b.
Casework:
1. 1/8” thick welded aluminum
construction, front panel access to critical
components.
2. All stainless steel hardware
3. White powder coat finish inside and out
4. “YOUR SPEED” reflective sign included.
5. 1/8” clear polycarbonate lens with a non-glare
textured finish.
6. Universal mounting bracket included – please specify
application