Controller
• Input: 6V
• Standby Power Consumption: < 1W
• Maximum Working Current: 6A
• Power: <30W
• Working Temperature: -20 to 60°C / -4 to 140°F
• Weight: 50 g / 1.76 oz
• Dimensions: 5.0 x 3.5 x 2.2 cm / 2.0 x 1.4 x 0.9 in
Button Control
Note: This string light includes a memory function. It will remember your
last setting when turned on.
FAQ
Q: Can I plug one string into the end of another string?
A: No, you cannot connect the strings end to end.
Q: The lights are not working.
A: Please make sure the lights are connected correctly and the input
power is correct.
Q: I have chosen flash / smooth mode, but the lights are not changing.
A: It is possible that the change speed is too slow. Press the up and
down button to change the flash / smooth speed.
Q: How can I change the brightness level under fade / smooth mode?
A: To adjust the brightness level in a particular mode:
• Clear the mode by pressing “Clear” button.
• Adjust the brightness level by pressing any one of the buttons with
number of 10, 20, 30 etc. to set your desired brightness.
• Select the mode you prefer by pressing the corresponding button.
Note: Brightness setting won’t work if set after mode selection.
Set the brightness prior to selecting the mode.
03/04
Button Operation
①
. ON / OFF
②
. Increase /
Decrease Button
Controls
Turns the string light ON / OFF
Adjusts the flash speed in flash /
smooth mode.
③
. Brightness Setting
④
. Clear Button
⑤
. Smooth Mode
⑥
. Flash Mode
Adjusts the brightness level from least
bright (10) to most bright (100).
Clears the current mode and return
to 100% brightness.
The light gradually fades in and out.
The light flashes at a constant speed
and can be changed between 1 Hz,
2 Hz, 3 Hz. FF means fast flashes.
OFF
100
90
50
40
30
20
80
70
60
10
ON
Clear
1HZ
Flash
2HZ
Flash
3HZ
Flash
FF
Smooth
20S
Smooth
15S
Smooth
10S
Smooth
5S
Smooth
①
③
②
④
⑥
⑤
