Humidity
Sleep
M
Water Level
1
2
3
4
5
%
H
⑩
①
②
③
④
⑤
⑦
⑥
⑧
⑨
Control Panel
1. Power Button
2. Humidity Indicator
3. Sleep Mode Indicator
4. Humidity / Sleep Mode Button
5. LED Display
6. Humidity / Timer Level Buttons
7. Timer Button
8. Water Level Indicator
9. Mist Button
10. Mist Level Indicator
How to Use
Open the tank lid, put the filter into the tank . Add an appropriate amount of water
into it, no higher than the max water level. Put the lid back on. Connect to a power
source, the device will enter standby mode with a beep sound. The LED display will
show the current RH.
Turn on / off the Mist
1. Tap the Power Button to start mist output (default: 3rd level) with a beep sound.
2. Tap again to stop output with a beep sound.
Note: The water level indicator will light up in red first when you turn on the device
and then turn green in 30 seconds after water going down to the base from water
tank.
Mist Adjustment
Tap the Mist Button to adjust the mist level, a beep sound will be heard with each
tap and the mist level indicator will light up accordingly.
03/04
