Cleaning the Water Tank
Before cleaning, make sure the unit is turned off and the power adapter
is disconnected.
•
Cleaning the water tank regularly (recommended once every 2-3 weeks):
Remove the water tank plug, wipe off the lime scale,and rinse with clean water.
•
Cleaning the base (recommended once a week): Wipe the base with a soft
cloth dipped with a mild cleaning agent and rinse off with clean water.
•
Cleaning the humidifier: Rinse a soft cloth in warm water and wipe off surface
stains. You can rinse the nozzle under tap water directly.
•
Storing the humidifier: When the unit has not been used for a long time, clean
and dry the unit and store it in a dry place in the original package.
07/08
- Do not power on the humidifier when the water tank is not in place.
- Never add water hotter than 40°C / 104°F to avoid any possible damage or
malfunction of the device.
- Do not pour water through the mist nozzle. Wipe off any water outside the body
with dry cloth.
- When the room temperature is 0°C / 32°F or below, please empty water from the
unit, as ice will damage the components.
- Do not place metals, chemicals, essential oils, or detergents into the water to
avoid any possible damage or malfunction of the device.
- When the water tank is full, do not move it as the water might overflow or flow
into the body and cause damage.
- Do not add water through the nozzle directly under the tap.
- After each use, turn off the unit and unplug the power outlet.
- Do not pour water into the water tank when the power is on or when the
power adapter is plugged in.
- When the water tank is full, the unit can work for 7-12 hours continuously
without needing a refill.
Troubleshooting Guide
Problem
No mist
coming out
Abnormal mist
Water leakage
Bad/
strange smell
Mist or drops of
water form
around the
device
Causes
No power source
Connect power adapter
Power not turned on
Low water
The device is getting too hot
Water exceeds max level
Stain built up inside
water tank
Air inlet blocked by dust
Cover not properly covered
Unit is new
Dirty water
High mist output
Contaminated water
Temperature and humidity
of environment is too high
Cap on the cover properly
Adjust the mist output to low
Use clean water
Move the unit to a well
ventilated area
Clean water tank as
instructed, use after air drying
Clean water tank as
instructed, use clean water
Get rid of some water
Clean the water tank
as instructed
Clean air inlet
Tap the Power Button to
turn on the humidifier
Power off and place in
a well ventilated place
for 10 minutes
Abnormal water pressure
Clear the remaining
water in the base each
time after use
Add water into the water tank
Solutions
