1 x TaoTronics Wireless ANC Headphones (TT-BH090)
1 x Micro-USB Charging Cable
1 x 3.5mm Audio Cable
1 x Travel Pouch
1 x User Guide
1. Charging
1) Connect the charging port with any USB charging adapter or active
computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns green.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each
other (within 3 feet / 1 meter).
2) Press and hold the Multifunction Button for 5 seconds to bring the headphones
into pairing mode with the LED indicator flashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth®
connections.
4) Find “TaoTronics SoundSurge 90” in the search results. Tap on the name to
connect. Once connected, the LED indicator will flash blue once every 5 seconds
with a warning tone "Connected".
Function
Power On
Power Off
Bluetooth Pairing
ANC On / Off
Play / Pause /Answer /
Hang up Calls
Reject Calls
Operation
Press and hold the Multifunction Button for 3 seconds
with a warning tone “Power On”
Press and hold the Multifunction Button for 3 seconds
with a warning tone “Power Off”
Press and hold the Multifunction Button for 5 seconds
with a warning tone “Pairing”
When the headphones are on, press the ANC Button
once to turn on / off the ANC function with the ANC
indicator turning on / off
Press the Multifunction Button once
Press and hold the Multifunction Button for 2 seconds
When there is a second incoming call (B) in the course
of an ongoing call (A), press the Multifunction Button
once to answer B and hang up A
Note:
• Automatic Re-pairing: The Bluetooth® headphones can remember devices
paired previously. You may simply turn on the headphones and the device
(with Bluetooth activated), and they will connect to the last connected device
automatically without going into the pairing mode.
3. Clear Pairing History
1) If the headphones fail to pair with your Bluetooth® device, clear the pairing
history by pressing and holding the Multifunction and Volume - Buttons
simultaneously when the headphones are on until the LED indicator stays
solid purple for 2 seconds indicating clearing successfully. Then re-pair your
Bluetooth® device as instructed in Pairing.
2) If you want to pair the headphones with another device when already paired,
deactivate the Bluetooth® function on the paired device or remove "TaoTron-
ics SoundSurge 90" from the Bluetooth list.
Second Call
PACKAGE CONTENTS
HOW TO USE
BUTTON CONTROL
ENGLISH / 01
ENGLISH / 02