Power On
Uncover the lid to turn on the earbuds with the working indicators on both
earbuds flashing red then blue for about 3 seconds. Then the earbuds will
enter pairing mode.
Power Off
Put the earbuds into the charging case, close the lid.
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. Once connected, The working indicator on the left earbud
will flash blue and red alternately while that on the right earbud will flash
blue slowly indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TaoTronics Duo Free +” in the searching results, tap on the
name to connect.
3. Once connected, the working indicators on both earbuds will flash blue
slowly.
Note:
• Please do not remove the earbuds from the charging case when indicators
on both earbuds are flashing red.
• We recommend you to take out the earbuds from the charging case only
when the earbuds complete automatic pairing in the charging case.
• If the earbuds failed to pair with each other, please disconnect the
Bluetooth connection with your device, put them back into the charging
case, close the lid then open it to pair again.
• It is not recommended to wear the two earbuds on different people. If
needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode
with its working indicator flashing blue and red alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TaoTronics Duo Free + ” (left earbud mode) / “TaoTronics
Duo Free + R ” (right earbud mode) in the searching results, tap on the
name to connect.
4. Once connected, the working indicator on the left (right) earbud will flash
blue slowly.
Note:
• If you are using left earbud in single earbud mode, it can not change to
couple earbuds mode when the right earbud is on.
• If you want to change to couple mode, place the two earbuds into the
charging case and cover the lid, then open it again, they will pair with each
other automatically.
• In single earbud mode, volume and track adjustment is disabled.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. Put the earbuds back into the charging case, close the lid then open it to
turn on the earbuds, when the working indicator on the left earbud flashes
blue and red alternately, press and hold the Multifunction Touch Control
immediately for 10 seconds until the working indicator on the left earbud
flash purple 3 times to enter reset mode, and the two earbuds will pair with
each other automatically.
06
07
2. Pair them with your device when the working indicator on the left earbud
flashes blue and red alternately while that on the right earbud flashes blue
slowly indicating the earbuds are in pairing mode now.
3. If you have paired your device with the earbuds before, remove "TaoTronics
Duo Free +" from the Bluetooth device list and pair again.
Note:
• Press the Multifunction Touch Control immediately when the working
indicator on the left earbud flashes blue and red alternately, or you will fail
to clear pairing history.
• If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear “TaoTronics Duo Free +” from its Bluetooth list. Restore the
earbuds to factory settings as instructed above if pairing failed.
OPERATION AND FUNCTIONS
Function
Play / Pause
Operation
Tap the Touch Control on
either of the earbuds twice
Tap the Touch Control on the
right earbud
Tap the Touch Control on the
left earbud
Tap the Touch Control on the
right earbud three times
Tap the Touch Control on
either of the earbuds once
Tap the Touch Control on the
left earbud three times
Tap and hold the Touch
Control on either of the
earbuds for 2 seconds
Tap the Touch Control on
either of the earbuds twice
Volume -
Next Track
Previous Track
Answer Phone
Call
Decline an
Incoming Call
Redial
Hang up
Phone Call
Tap the Touch Control on
either of the earbuds four
times
Voice Prompt
/
Toots when highest setting
is reached
Toots when lowest setting
is reached
/
/
Ring tone sounds when call
is incoming
Toot when Connected
Toot
Toot
/
Turn On / Off
Voice Control
When paired successfully,
press and hold the Touch
Control on either of the
earbuds for 2 seconds until a
beep is heard.
Toot
Clear Pairing
List
Refer to the “Clear Pairing
List” section
/
Go into Pairing
Mode
Refer to the “Pairing” section
Pairing
Successfully
paired with
your device
/
Pairing Successful
Connected
Bluetooth out
of Range /
Failed to pair
with your
device
/
Disconnected
Note:
Only when you are wearing the earbuds can you hear the voice prompt.
CLEANING AND MAINTENANCE
1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
Note:
Do not insert anything into the product.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
