IG-21-8-020-A
Wall Mount Installation
Using the mounting plate as a guide mark the position
of the screws to the desired location. Drill holes for wall
mount studs(6mm[1/4”] diamter, min 25mm[1”] depth)
and secure the studs in place. Position the washers into
the mounting plate, insert the screws through and into
the wall studs. Drive the screws in and tighten to secure
the mounting plate in place
Insert the tightening nut onto the ball joint mount from
the mounting plate
Insert the ball joint firmly into the socket on the back of
the antenna bodyand slide the tightening nut into the
antenna housing’s back plate to secure in place. Adjust
to the desired antenna orientation on the ball joint and
tighten the nut to fix the antenna in place
Installation Completed
Correct Screw and Washer Location
