0 - 25 %
25 - 50 %
50 - 75 %
75 - 99 %
100 %
Power level of
built-in battery
Power level of
built-in battery
LED status
LED status
Function
Play / pause
Increase volume
Decrease volume
Previous song
Next song
Answer / end a call
Refuse incoming call
Voice assistance *
2
Button
Press MFB on either one of the earbuds once
Press MFB of the right earbud twice
Press MFB of the left earbud twice
Press and hold MFB of the left earbud for 1 second,
with tone notification
Press and hold MFB of the right earbud for 1 second,
with tone notification
Press MFB on either one of the earbuds once
Press and hold MFB on either one of the earbuds for 2 seconds
Triple click MFB on either one of the earbuds
Bluetooth Sync Indicator
White LED lights up during charging and it will turn off once fully charged.
Power / Multifunction Button (MFB)
For power on:
∙
When the earbuds are inside the charging case (being charged or fully
charged): Take the earbuds from the charging case, both earbuds
switch on automatically and you can hear “power on”. Then, they will
connect to each other automatically and you can hear “connecting”.
Or
∙
When the earbuds are off (outside charging case): Press the MFB of
both earbuds for 2 seconds to turn the earbuds on.
Pairing the earbuds with a Bluetooth device
∙
Take both earbuds out of the charging case and insert them into your
ears. The distance between left and right earbud should not exceed
50 cm otherwise there may be problem in connecting each other.
∙
You will hear the voice prompt “power on”, “connecting” and “pairing”
from both left and right earbud. The earbuds are in pairing mode now.
The LED of the right earbud is flashing in blue and white.
∙
Activate the Bluetooth feature of your Bluetooth device.
∙
Select the ‘MUVEACOUSTICS:TAO’ from the list of found Bluetooth
devices. If pairing was successful, you can hear the voice prompt “your
device is connected” from right earbud. Then the LED of the earbud
turns off.
If there is no connection is made within 90 seconds, pairing mode is
terminated and the earbuds will turn to idle mode. Please turn off
the earbuds and repeat the pairing procedure if necessary.
For power off:
∙
Place both earbuds into the charging case. They will turn off
automatically and also be recharged.
Or
∙
You can also press and hold the MFB of any earbud for 4 seconds.
Both earbuds will turn off and you hear “power off”.
Play / Pause
Music playback pauses when you press the MFB of any earbud once
and resumes when you press once again.
Volume Up
Double press the MFB button of the right earbud.
Next Song
Press and hold the MFB of the right earbud for 1 second and hear the
tone notification.
Volume Down
Double press the MFB button of the left earbud.
Previous Song
Press and hold the MFB of the left earbud for 1 second and hear the
tone notification.
Voice Assistant
Triple click the MFB of either left or right earbud to activate the voice
assistant feature of your Bluetooth device. Voice assistant functions vary
depending on your phone, tablet or application.
Receive a phone call
Press the MFB once of either left or right earbud.
End a phone call
Press the MFB once of either left or right earbud.
Refuse a phone call
Press and hold MFB for 2 seconds of either left or right earbud.
Reset earbuds to factory settings
When there is problem in connecting the earbuds to each other, turn off
the earbuds, then press and hold the MFB simultaneously for 10 seconds.
You can hear the voice notification of “reset”. The earbuds are reset to the
factory settings. All pairing information is deleted. Then put the earbuds
in the charging case for next use.
When the power of the earbuds is low, you can hear “battery low” every
2 minutes. Please re-charge them by placing them in the charging case
otherwise they will turn off automatically after some minutes.
Charging case is also a storage for the earbuds.
∙
Use the micro USB cable provided with this device for connecting
USB power source to the charging case in order to charge up
the built-in battery of the charging case.
∙
The input voltage to the charging case is DC 5V and minimum 1A
current capacity. In order to charge the device in safe manner and
reliable conditions, please only adopt certified appropriate
charger / adapter for charging.
∙
The white LED indicators are flashing while the charging case is being
charged. All of them will be always on when the charging case
has been fully charged.
Indication of power level of built-in battery of charging case
∙
White LED of both earbuds lights up during charging and it will
turn off once fully charged.
∙
You can charge the earbuds as long as the charging case still has
power, no matter the charging case is being charged or not.
∙
You must charge the charging case and earbuds if they have not
been used for more than 6 months.
∙
When the charging case is not being charged and you want to check
the power level of it, please take out the right earbud from the
charging case or put the right earbud back into the charging case.
The LED indicators of the charging case show the power level of the
built-in battery for 3 seconds.
Before your first use, please insert the earpbuds into the charging case and
connect the micro USB cable provided to the charging case and to a USB
power source. It takes about 2-2.5 hours for a full charge.
Earbuds
Charging Case *
1
Operational Guidance
Please Note:
1. TAO earbuds come with a lithium-ion polymer battery.
For best results, fully charge TAO earbuds before use. It will take 2 – 2.5 hours
to fully charged.
Place the earbuds in the charging case before you start charging.
To charge, plug the micro USB cable into charging case and plug the standard
USB connector into your DC5V USB power source.
You can also charge the earbuds as long as the charging case still has power
(without connecting to USB power source).
The charging case can be charged up individually and can be used for
charging the earbuds later.
2. Voice assistant functions vary depending on your phone, tablet or application.
3. TAO earbuds is rated at IPX5 waterproof and true wireless.
4. Charging case is not a waterproof device.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
