www.taoelectronics.com
5
Getting Started
Clock and Setup Menu Overview
•
Remove the protective film covering the LCD screen by
lifting the pull tab.
•
Plug the included AC Power Adapter into the frame,
and then into a standard110-220 volt AC electrical out-
let.
•
Power on the Digital Photo Frame by pressing the
power button on the remote control or the frame.
•
If there are photos stored in the internal memory or on
an inserted memory card, a the Thumbnail Screen will
appear.
P
re
p
a
ra
tio
n
The digital LCD panel has a viewing angle of approximately
25 degrees in either direction. You can achieve a better
viewing angle by adjusting the frame stand height.
•
Extend the frame stand to a position for greatest stabil-
ity.
•
Extend or retract the strand by pushing the tab on the
stand, and adjusting the length.
•
Release the tab to lock the frame into position.
Adjusting the Viewing Angle
©2008 TAO Electronics, Inc.
Turning the Power On/Off
Turning the Digital Photo Frame On
1.
Press the On/Off button.
Turning the Digital Photo Frame Off
Main Menu
6
1.
Press the Tool button on the back of your frame to
enter the Main Menu.
2.
Press the Next or Previous button to cycle through
modes.
Photo
: Displays Digital Photos as stills, slideshow, or
split-screen slideshow.
Clock
: Date and Time settings
Music
: Access and play MP3 music files.
Setup
: General Settings and Preferences.
1.
Connect the AC adapter to a power source.
2.
Press the On/Off button (back of the frame).
