http://www.titanjet.com.cn
Tel
：
+86-760-88667089 / 88667090
Fax
：
+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add
：
No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
- 9 -
Assembling illustration
Attention
：
Be careful when assembling to make sure every step is accurate and screw fix well
Overall view of printer
：
4
、
Electrify, reset of carriage and others
4.1. take out the power wire from spare parts box and connect printer to 220V AC power supplier,
main board will release a bee sound when press the switch on, and the 6 lights on the carriage will
lighting, see illustration:
6 Lights
4.2.The carriage will move to left slowly when turn on the printer, then to left a little while the limit stopper which
on the right front of the carriage move to the upside position of the yellow limit switch and at least arrived at the middle
of limit switch, during this action, the red light on limit switch will gleam
，
at the same time, the main board will respond