Tao Motor DB-20, Owner'S Manual

Page: 16 / 21

o
Replace the spark plug cap.
o
Whenever the spark plug must be properly tightened to prevent very hot and possibly damage the engine.
o Never use an improper heat range plug, because it could cause engine damage
o
We recommend using spark plug A7RTC C7HSA
o
Ningbo Newstar Spark Plug CO,Ltd NGK SPARK PLUG (SHANGHAI) CO.,LTD.
5. Fuel filter and replacement
1. Remove the filter hose and drain the gasoline remaining in the circuit
2. Remove the filter
3. Install the new filter and reconnect the hose
6. Checking and cleaning the air filter
The air filter should be removed and disassembled to see if contaminated.
~~~Disassemble process:~~~
1.
Remove the air filter cover
2.
Remove the screw and disassemble the air filter
~~~Cleaning~~~
1. Being a paper filter element can be cleaned with pressurized air, by blowing from inside to outside.
2. It is recommended to replace according to maintenance table indicates since it may make factors such as fuel consumption, pollution and
engine life.
NOTES
•
The air filter element must be intact, otherwise, the engine absorb dust and pollutants and period of engine life will be shortened.
•
Avoid getting water in the air filter during washing dirt bike
•
Never clean the air filter element with water, gasoline or any liquid.
7. Throttle cable adjustment
1. Measure the throttle cable free play, the stipulated value should be 2-6mm.
。
If the throttle cable free play is not within the parameters stipulated by adjusting the distance adjuster.
8.Carburetor adjustment
The carburetor adjustment and settings must be assembled by authorized and trained technician, informal tuning can cause engine damage.
9.Brake Review
•Operate front & rear brakes verify for proper operation.