USER GUIDE
1)Pre-ride inspection
•
It is necessary for your safety, check:
•
Engine oil level
•
fuel, according to the route to go
•
Tire pressures
•
Operation of the throttle
•
Operation of lights and indicators
•
Proper operation of the brakes
2)Starting Engine Cold
•
Follow these steps:
•
Place the unit on level ground
•
Turn ignition key to ON position
•
Put kill switch to run position
•
Move chock lever to cold start position (all the way up )
•
Make sure gear shifter is in neutral
•
Push down on kick start lever start accelerating throttle to 1/4
3)Starting Engine Warm
•
Follow these steps:
•
Place the unit on level ground
•
Turn ignition key to ON position
•
Put kill switch to run position
•
Move chock lever to warm start position (all the way down )
•
Make sure gear shifter is in neutral
•
Push down on kick start lever start accelerating throttle to 1/4
4)Stopping Engine / Turning Off Engine
•
Put kill switch to off position or Turn ignition key to OFF position
•
DRIVING
•
Tips to follow:
•
Warm up the engine before driving.
•
Gradually increase the engine speed by half of the throttle, to avoid unnecessary skids.
•
Coordinate the throttle and brakes to a slowdown optimal.
•
Must use a dual brakes (front and rear) and they should not be applied too tightly, so such as not to reduce the braking
efficiency.
Summary of Contents for DB-20
Page 1: ...OWNERS MANUAL TAO MOTOR DIRT BIKE ...
Page 9: ...Parts location ...
