When not in use, the spinnaker pole (71) is stowed vertically on the foreside of
the mast in the stowage ring (72) provided. Clip one end of the pole to the slide
(73) on the spinnaker track (74), attach topping lift (65) and foreguy (66) release
the slide and guide the pole into the ring or clip it to it. Any tendency for the pole
to rattle can be avoided by clipping the pole to the stowage ring and t ighten
ing both topping lift and foreguy lines.
BOW PULPIT, LIFELINES & STERN RAIL
These should be assembled and installed in the appropriate stanchion bases.
Care must be taken to ensure that the correct stanchion is placed in each base
in accordance with the markings. Each stanchion base and T-joint has been
drilled to accept securing screws in addition to the set screws, and these holes
should match those in the stanchion tube.
The turnbuckles on the lifelines and stern rail should be tightened until the lines
are tight and both lock nuts fastened very securely with a spike and wrench.
These lines will stretch slightly and will require re-tightening periodically. It is also
important to check and tighten all the securing screws and set screws regularly.
Summary of Contents for 22
Page 1: ...Tanzer 22 Owner s Guide ...
Page 2: ......