3. Intermittent Use
If the gun has the function of low-pressure operation (no more than 20 bar, be used
along with detergent), the cleaner will standby at the state of bypass pressure relief
after release the gun trigger. If you withhold the gun trigger again, the pump will
return to normal operation state.
Do not operate this cleaner for more than 3 min at the state of bypass pressure relief.
4. Shutdown and Store the Cleaner
If you want to store the cleaner, please remove the inlet hose from water supply.
Start this cleaner and run for several seconds when the spray gun opens, until the
remaining water come out the high pressure pump.
After finish
the above procedures, please turn the switch to “OFF state” and break
the power supply. Remove the wire from the power and roll up carefully, avoiding to
bend it.
Remove the high pressure hose from the cleaner and roll up carefully, avoiding to
bend it. Remove the spray gun and store it appropriately.
After the motor cools down to room temperature, clean the water logging on the
surface of this machine and put it in order. Then, store this cleaner with power cable,
high pressure gun and high/low pressure hose in the dried and clean space.
When the cleaner is standing for cooling down, make sure that no children, elders
or disabled touch.
When the cleaner is standing for cooling down, make sure that this place is stable
and will not let this cleaner slide and move.
When the cleaner is standing for cooling down, make sure that there is nothing
inflammable around this place.
