17
FRONT PANEL OPERATION
Routing
Routing section -as illustrated on the Front
panel
- alternative illustration of the Routing
section
The Routing section is the “railway-station” in
the signal chain. The signal present on Inputs
A/B can via the 2x4 select switches be routed
to none, any or all of the four Output channels.
From the Routing section out the four channels
are individually processed with separate X-
Over, EQ, Delay, Limiter and Output blocks.
Notice that the front panel layout is identical to
the actual signal flow through the unit.
Example:
Input A distributed to Output 1 and 2
Input B distributed to Output 3 and 4
A typical example for a stereo setup with split in
both sides.
More examples on pages 10 to 13.
X-Over A,B:
Type:
Gain
Freq:
Width/Slope:
X-Over
Hi Pass
N/A
20 Hz – 20 kHz
1st order
Lo Pass
Butterworth 2.
Butterworth 3.
Butterworth 4.
Bessel 2.
Bessel 3.
Bessel 4.
Linkw.Riley 2.
Linkw.Riley 4.
X-Over
For optimal settings please refer to your
speaker specifications.
The TDX-1 may hold presets that perfectly
match your speaker configuration.
SPM CTRL_US_2909.qxd 29-09-2004 13:10 Page 17
