Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
POWERV12
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV12 data file // Issue: 1.06 // 15.01.08
The loudspeaker shall consist of a 300mm (12.00”) full range, point source Dual Concentric™ transducer. The low and high frequency elements shall be
driven by an integrated single channel Class D amplifier through an internal passive crossover network operating at 1.4kHz. Performance of the loudspeaker
shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis with swept sine wave shall be 70Hz to 25kHz (-3dB) in full
range mode and 100Hz to 30kHz in high pass mode. Rated average SPL shall be 120dB (anechoic) on axis at 1 metre. The dispersion of the loudspeaker
shall be 90 degrees conical (-6dB).
The enclosure shall be an optimally tuned 37.5 litre vented 15mm (0.62”) birch ply cabinet with 15mm (0.62”) MDF front baffle. Connectors shall be
1 x female XLR (input), 1 x male XLR (link) and 1 x Neutrik Powercon. The speaker shall be fitted with the following controls and indicators: level control,
blue power LED, green signal LED, red limit LED, full range / high pass switch (110Hz) and a power switch. The enclosure shall be fitted with 8 x integral
M10 inserts for flying hardware and 8 x M10 yoke bracket inserts. There shall be 3 carry recessed handles and blanking plate for an optional pole mount
adaptor.
The enclosure shall not exceed the following dimensions: 486 x 370 x 260mm or 19.13 x 14.57 x 14.17” (H x W x D).
The loudspeaker shall be the Tannoy… POWERV12.
Architectural specifications
