17
10. Technical Specifications
System Type
Vented, full range ICT™ loudspeaker system
Frequency Response (1) +/- 3dB 85-22kHz
Power Handling(2) 50 watt
Sensitivity (1) 2.83 volt @ 1m 90 dB
Maximum SPL (3) @ 1m 105 dB with THP 30 Transformer (Anechoic)
108 dB with THP 30 Transformer (Half-space)
107 dB @ 8
Ω
(Anechoic)
110 dB @ 8
Ω
(Half-space)
Impedance Nominal 6 ohm
Minimum 4 ohm
DI Averaged @ 500Hz 3.52
@ 1kHz 4.44
@ 2kHz 3.40
@ 4kHz 10.30
@ 8kHz 10.81
@ 16kHz 11.95
Q Averaged @ 500Hz 2.25
@ 1kHz 2.78
@ 2kHz 2.19
@ 4kHz 10.73
@ 8kHz 12.06
@ 16kHz 15.67
Driver Complement
1 x 5” (130mm) full range, ICT™ Point Source
Enclosure 4.21 litres, vented with integral steel back can
Finish White
System Weight (in back can) 3.11 kg
Dimensions Can height: 187mm (204mm including tie-back ring)
Baffle Diameter: 240mm
Back can diameter: 208mm
Hole cut-out 210mm
Accessories C Ring (optional)
Tile Bridge (optional)
Plaster Ring (optional)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
Summary of Contents for CMS50
Page 1: ...CMS50 CMS50T ICT USER MANUAL HOLE CUT OUT SIZE 210mm 21210mm ...
Page 2: ...2 ...
Page 9: ...9 Figure 3g ...
