Tannoy 6D 66D & 8D Owner'S Manual Download Page 12

Page: 12 / 12

11.0:

WARRANTY

NO MAINTENANCE OF THE REVEAL 6D, 8D & 66D MONITORS IS NECESSARY.

All components are guaranteed for a period of one year from the date of manufacture, subject to the absence of, or evidence
of, misuse, overload or accidental damage.

For further information please contact your dealer or the distributor in your country.

If you cannot locate your distributor please contact:

Customer Services, Tannoy Ltd., Coatbridge, Strathclyde, ML5 4TF, Scotland
Telephone: 01236 420199

(UK)

+44 1236 420199

(International)

Fax: 01236 428230

(UK)

+44 1236 428230

(International)

Internet: http://www.tannoy.com

DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION

This warranty in no way affects your statutory rights.

12.0:

DECLARATION OF CONFORMITY

The following apparatus is/are manufactured in China by Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5
4TF. The following equipment is marked with the CE label and conform(s) to the protection requirements of the European
Electromagnetic Compatibility Standards and Directives. The apparatus is designed and constructed such that electromagnetic
disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate
as intended, and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation
as specified and intended.

Details of the Apparatus:

Reveal 6D Studio Monitor
Reveal 8D Studio Monitor
Reveal 66D Studio Monitor

The equipment listed above is covered by this certificate and marked with the CE-label conforms to the following standards:

EN 60065

Safety requirements for mains operated electronic and related

(IEC 60065)

apparatus for household and similar general use

EN 55103-1

Product family standard for audio, video, audio-visual and entertainment lighting control apparatus
for professional use. Part 1: Emission.

EN 55103-2

Product family standard for audio, video, audio-visual and entertainment lighting control apparatus
for professional use. Part 2: Immunity.

With reference to regulations in following directives:
73/23/EEC, 89/336/EEC

Signed:

Position: Technical

Director

Date:

1 March 2005

For Tannoy Ltd

10.0:

SERVICING

10.1

CABINET FINISH

To remove marks and scuffs use a soft brush. If necessary, a little warm water and detergent can be used but under no
circumstances use a solvent or abrasive cleaner.

10.2:

DRIVER REMOVAL

Lay the cabinet on its back. Remove the ten hexagonal screws and set aside. Ease the driver from the front of the cabinet taking
care not to mark the front surface. Remove the driver, note the polarity of the internal connections and disconnect the internal
wiring. Take care not to damage the moving parts of the LF driver. To refit the driver, connect the cables from the crossover to
the LF terminals. Fit the driver into the mounting hole, making sure that the internal connecting cables are not trapped or able
to touch the LF cone. Fasten the screws finger tight and then progressively tighten them down with the appropriate Allen key.
Repeat the same procedure for the HF driver.

10.3:

AMPLIFIER

A fuse is located just under the mains input (fig 1). Replacement is simple and a spare fuse is provided inside the fuse housing
itself. Always use the correctly rated fuse, as indicated on the silk screen-printing. Only qualified and authorised personnel should
undertake any other servicing regarding the amplifier section.

In case of any malfunction of the unit, the first thing to check should be the input connection, more especially if the source has
unbalanced outputs (see "Connecting your speakers" section) as improper connection can result in significant level reduction
and affect the response.

10.4:

LIST OF SPARE PARTS

Driver Kit

High Frequency Unit

Amplifier Complete

Filter Board Assembly

Power Board Assembly

Digital I/O Board Assembly

Features Board Assembly

Transformer

Passive Crossover

DESCRIPTION