110 SERIES SUBWOOFERS AND INPUT MODULES
This manual is intended for the owner, operator or installer of Tannoy 110 Series Subwoofers. It is a guide for installing,
setting up and operating the 110 Series in accordance with established codes and practices available at the time of
publication. It does not and can not detail all possible mounting or wire configurations. The end user is advised to retain
the advice and services of a qualified contractor who is familiar with local codes and trained in the installation of Tannoy
professional audio systems.
The 110 family of subwoofers has been engineered to deliver low frequency extension and impact from a concealed
ceiling mounted position.
The 110 series subwoofers feature a 10” long excursion driver capable of low end response down to 31 Hz and power
handling in excess of 100 Watts. Its design is fully complementary to any Tannoy full range wall or ceiling mount
loudspeaker.
Two different subwoofer cabinet designs and five different input “modules” offer a wide range of combinations that can
meet almost any installation challenge, and fit into any indoor environment.
Today’s sound reinforcement systems - whether in commercial or institutional environments - must handle program
material that demands high impact, high fidelity audio reproduction. At the same time, they must be nearly invisible. The
Tannoy 110 Series of subwoofers meet all of these criteria without compromise.
110TB (TILE BRIDGE) CABINET
Simple yet sophisticated, the 110TB is the first product of its kind: a true ceiling
mounted subwoofer. Engineered to deliver low frequency extension (-3dB @ 31 Hz)
and impact from a concealed ceiling mounted position, the 110TB integrates almost
invisibly into any indoor environment by using a standard air handling vent cover as a
speaker grille. The easy to install 110TB drops seamlessly into a 2’ x 2’ ceiling tile
without any special construction requirements. Each corner of the cabinet is fitted
with a seismic tether point. This system can also be flown in free space via 3/8”
threaded rod, chain or aircraft cable. Fire rating is NFPA class A. Whether your
application calls for low level warmth or high SPL slam, the 110TB provides the
required punch.
CABINET OPTIONS
110SR (SHEET ROCK) CABINET
The second in the Tannoy family of true ceiling mounted subwoofers, the 110SR is
engineered to deliver low frequency extension (-3dB @ 31 Hz) and impact from a
concealed position. It is specifically designed for flush mount in sheet rock ceilings,
walls, overhangs or any position offering adequate clearance and suitable structural
support. The 110SR features seismic tether points, and safe and secure installation
with a sturdy pre-installation ring. The pre-installation ring is available separately for
new construction where the sheet rock installers are in ahead of the contractor. A
unique benefit of the 110SR is that it remains serviceable, and fully removable, from
the ground after installation by simply removing the low profile grille. Fire rating is
NFPA class A.
